+91-9867711168 / 9322425158 projects.imix@gmail.com

Perfect solution for all your bag discharge problems The machine ends all your dust and discharge problems once and for all. The automatic bag slitter machine is suitable for the continuous and dust-free handling of all types of single- or multi-layered bags. Paper, plastic, large, small, dense- or light-filled with granular or powdered products, will cut and empty them without problems. Depending on the properties of the product and the condition of the bags, capacities up to 20 tons per hour can be obtained. The standard execution will handle approximately 10 tons per hour.


LUMP BREAKER :- IMIXX’S Lump Breaker consists of a square cross section casing with upper and lower flange, two horizontal rotating shafts equipped with chopping knives, a grid to hold back lumps, four end bearing assemblies with integrated adjustable shaft seal, an appropriately sized drive unit complete with power transmission.

Function :- Lump Breaker is the ideal device for breaking up material lumps which have formed during handling or processing but are soft enough to be broken up. Quick rotation of special chopping knives through a fixed grid does the job. The presence of two rotor shafts results in high throughput rates.

Features :- Material: carbon steel, 304L stainless steel . Two sizes available: 1 ~ 50 m3/h . Contains two rotor shafts equipped with chopping knives and a fixed grid to reduce clearance. Drive unit with fixed speed gear motor or variable speed drive, chain or gear transmission

Benefits:- Sturdy and compact, Modular design , Compact shipping dimensions and easy to install

Screw Conveyor

Screw conveyors with Hopper – The screw conveyor hopper from IMixx is specially designed to increase the flow of both free-flowing and non-free-flowing bulk materials. The ultra-modern high flow hopper with flexible screw conveyors is deliberately engineered to eliminate or decrease the amount of residual material in the hopper as well as the need for flow promotion devices. The hopper walls direct the material into a rotating flexible screw more positively than with previous rectangular interface adapters. This is one of the biggest advantages and prime reason for the critical recognition of the product. The screw conveyor with hopper is an efficient material handling system and one of the most durable machines under the segment.


  • Accurate dimension
  • Robust in design
  • Long service life

Other Details:

Cost effectiveness

  • Highly durable
  • Unmatched quality
  • Reliability
  • Long service life
  • Highly durable

Vertical Screw Conveyor

Imixx Vertical Screw Conveying System consists of two units: a Horizontal Screw Feeder which receives material from a silo, hopper, or another feeder or conveyor, and a Vertical Screw Conveyor that lifts the material to a specific height. Material may be discharged into a mixer, pulverizer ,weigh hopper, into one or more bins or silos, or into another conveyor or conveying system.Fabricated components, screws, and bearing assemblies are specially designed for this system to facilitate maintenance.The Vertical Screw Conveying System excels through high volumetric efficiency and excellent mechanical features.

IMixx’s Vertical Screw Conveyors offered by us is assortment of product has highly used to lift & convey the material to certain level of elevation. The Vertical Screw Lift System consists of a horizontal screw feeder and a Vertical Screw Conveyor which is Used to convey various powder form materials used in Cement, Food , Animal Feed , Glass, Paints, Rubber, Plastics, Sugar, Paints, Chemicals, Paper, Mining. 


o   Screw diameter: 114 mm , 139 mm , 168 mm , 193 mm , 219 mm , 273 mm & 323 mm

o   Elevation height in 1 meter from ground level.

o   Output rates: 3 m³/h to  95 m3/h

Micro Batch Feeders (with mixer) Micro Batch Feeders are used for the continuous dosing of small quantities of powders and granules and are particularly suitable where it is required a high precision and to carry poorly flowing materials which tend to clog under pressure. They are equipped with a homogenization tool to maintain material 

Manual aid can auto-complete following work: o Weighing, filling, nipping-bags, sealing bags and conveying o Due to it is designed according the GMP standard, it more fits the fluidic or low fluidity materials, such as milk powder, fodder, rice powder, white sugar, coffee powder, mono sodium glutamate, solid beverage, dextrose, pharmaceuticals, and agriculture pesticide, granular additive, dyestuff and more…..

Belt weighing feeder is a bulk material for      automated        measurement equipment for   continuous   weighing, can not only help users to reduce the waste of   the material, can effectively improve the measurement efficiency of production, so it is widely used in coal, cement, chemical, metallurgical and other industries.